.png){kind=small}
Important information
01
Smart device required
You will need a Chromebook, computer, laptop or mobile phone to set up and manage your trackers. This device is essential for connecting the trackers to your Wi-Fi network and correctly defining which part of your body each one will be worn on.
02
Is it possible to use trackers without a device?
Yes, it is possible to use the trackers without a device after the initial setup. However, during the first setup, you will need a computer, laptop, Chromebook or cell phone to connect the trackers to Wi-Fi and set the position of each one on your body. After this step, the trackers can be used independently. To perform the reset without having to open the app, follow the
"Quick Reset Standalone" guide in the manual.
03
Can I manage trackers via cell phone?
Yes! You can do the initial setup on your computer or Chromebook and then manage your trackers directly from your phone.
To do this, simply connect your phone to the same Wi-Fi network as your trackers. Once they are turned on, they will automatically appear in your phone's app.
Written standalone manual
compatible with
Oculus Quest 2
Meta Quest 3s/3
Pico Neo 4
.png)
Download App
Download the app
Application available on:
Windows, Linux, IOS and Android.
.png)
Open App
Download the app
Turn on Tracker
Turn on your trackers and connect them one by one to your computer
Fishing
After connecting your tracker to your computer, turn on your WI-FI and connect your trackers
Configuring Trackers
01
Defining the location of its trackers
02
Place the stickers where the trackers are located.
With the trackers connected, move the tracker one tracker at a time. The tracker you move will glow in the app. After that, select the tracker that is glowing and you will place the position of your tracker
Setting tracker rotation
Click on '' Edit Mouring '' and define what is the position of
Your Tracker will be facing left or right.
Your right thigh trackers and right heel must be like ''right'' and their left -and -heel trackers must be like ''left''
03
Defining the location of its trackers
04
Seen your trackers in your body
Put the trackers on your body and enter the SteamVR
05
Connect your trackers to your VR
-
Go to Settings in the app
-
Under the "OSC" section, navigate to "VRChat OSC Trackers."
-
Enable the OSC option and then activate the specific trackers you have purchased by selecting them in the list.
06
Enter your IP address in the "Network Address" field
-
To find your IP address on the Meta Quest:
-
Turn on your Meta Quest.
-
Go to Settings > Wi-Fi.
-
Tap on the Wi-Fi network you’re connected to.
-
Scroll down and find the "IP Address" section.
-
Copy the IP address and paste it into the SlimeVR application.
Put all trackers on your body
FULLBODY TRACKING CLOTHING
VRChat configuration
ACTIVATE YOUR FULLBODY TRACKING
01
Join VRCHAT
-
Enter VRCHAT with your trackers on and turned on
-
Press the open menu button until the gestures tab opens
-
Go to options
-
-
02
OSC Configuration
-
Go to the OSC tab
-
Enable OSC option
-
03
Calibrating your trackers
-
Open the VRChat tab
-
Click on "Calibrate FBT"
-
CALIBRATE
01
To calibrate the trackers, click 'Full Reset' in the application and stand still looking forward for 3 seconds and stay in the position
02
Press 'Reset Mouting' and stay in the position in photo number 2 below. (If the trackers go in the wrong direction, redo the calibration)
